Product Summary & Main Parameters:

      Multi-station Vacuum Forming Machine is mainly used on automatic vacuum absorption forming of refrigerator cabinet, which consists of loading, pre-heating, heating, forming, trimming and unloading parts together.

      According to the conveyor methods, this kind of machine can be divided by chain type and clamp type. on the contrary, it is also distinguished by 4 stations and 5 stations if it has trimming device or not. Besides, by the difference in forming methods it has 2 sorts of absorption bubbling & bubbling.

      The device carries intelligent thermostat, servo motor driver, compressor forming, low temperature freezing and so on, which has features of highly energy-saving and highly automation, etc.

      General Technical Parameters (Only for reference)

      Maximum Forming Square        2000mm*1000mm

      Maximum Forming Depth         650mm

      Heating Power                           ~303Kw

      Total Electrical Supply              ~460Kw (380V, 50Hz)

      Total Air Supply                        ~3m³/min (0.5Mpa~0.65Mpa)

      Freezer Water Supply                ~20m³/h (5ºC~15ºC)

      Producing Cycle                        ≤36s/pcs

      Material for Forming                 ABS, HIPS or PS

      Material Thickness                    2.5mm~6.0mm